Specifications:
Rated output current 250A
Rated input voltage 230/400V
Rated frequency 50/60Hz
Rated input capacity 15.6kvA
No-load voltage 55V
Rated load sustain rate 20%
Current range 60-250A
Applicated welding rod diameter 2-5mm
Insulation grade F
Six months repair warranty
Sold out
Previous product
Back to products CROWN Miter Saw 2000W 255mm රු81,295.00
Next product
XCORT Welding Machine MMA-335H රු39,995.00
DBL Welding Transformer BX6-250G
රු31,295.00
Rated output current 250A
Rated input voltage 230/400V
Rated frequency 50/60Hz
Rated input capacity 15.6kvA
No-load voltage 55V
Rated load sustain rate 20%
Current range 60-250A
Applicated welding rod diameter 2-5mm
Insulation grade F
Six months repair warranty
Earn 312 reward points by purchasing this product
Out of stock
Description
Additional information
| Weight | 44 kg |
|---|---|
| Model No. | WEM0007 |
Reviews (0)
Be the first to review “DBL Welding Transformer BX6-250G” Cancel reply
Instalment Plans
Instalment Plans
Installment payments via credit cards can be made by selecting Payhere as the payment option at checkout. Cart total should be within the purchase limit specified below
| BANK | INSTALLMENT PLAN | MONTHLY AMOUNT | FEE TO CUSTOMER | PURCHASE LIMIT |
|---|---|---|---|---|
DFCC VISA,MASTER | 3 Months Plan | රු.10,810.02 | 3.5% | Min: රු.10,000 Max: රු.600,000 |
| 6 Months Plan | රු.5,490.35 | 5% | ||
| 12 Months Plan | රු.2,834.69 | 8% | ||
Commercial VISA,MASTER | 3 Months Plan | රු.10,431.67 | 0% (Interest FREE) | Min: රු.10,000 Max: රු.1,000,000 |
| 6 Months Plan | රු.5,548.76 | 6% | ||
| 12 Months Plan | රු.2,897.69 | 10% | ||
Sampath VISA,MASTER | 3 Months Plan | රු.10,431.67 | 0% (Interest FREE) | Min: රු.5,000 Max: රු.1,000,000 |
| 6 Months Plan | රු.5,263.20 | 0.9% | ||
| 12 Months Plan | රු.2,685.81 | 2.9% | ||
HNB VISA,MASTER | 3 Months Plan | රු.10,431.67 | 0% (Interest FREE) | Min: රු.10,000 Max: රු.1,000,000 |
| 6 Months Plan | රු.5,215.83 | 0% (Interest FREE) | ||
| 12 Months Plan | රු.2,607.92 | 0% (Interest FREE) |
Shipping & Delivery
*/*/
You may also like…
XCORT Welding Machine MMA-335H
Rated voltage 220 – 240V Frequency 50/60Hz Rated input Current 43.6A No-load voltage 68V Rated output current 335A Duty cycle 60% Efficiency 80% Power factor 0.73 Electrode diameter 1.6 -5.0mm Accessories included; 01Pc electrode holder with cable, 01Pc earth clamp with cable, 01Pc hand shield, 01Pc cleaning brush
Chain Saw 2500 cc 12”
Engine: Air cooled,Two-stroke,Single cylinder Gasoline Max Power: 0.9kw/8500rpm Fuel tank capacity: 230ML Oil tank capacity: 160ML Fuel &Oil(2T) mix ratio: 25:1 Start method: Recoil starter Speed: 2800-3600rpm Bar length: 12''
HUGO Welding Transformer PBX6-250
Rated output current 250A Power voltage 230V No-load voltage 55V Rated power 12.4kvA Frequency 50Hz Rated duty cycle 20% Current adjusting range 90-250A Diameter of applicable electrode 2-4mm Protection grade IP21S Six months repair warranty
Related products
Disk Mill FFC-23 With 5hp Motor
Model - FFC 23 Rotational Speed of Main Shaft (rpm) -5800 Outer Diameter of the Rotator (mm) - 230 Number of Oblate Gears of the Rotator (p.c.) - 4 Number of Knuckle Gears of the Rotator (p.c.) - 8 Circles of Square Gears of the Gear Wheel - 2 Pitch between Oblate Gear & Screen (mm) - 19 Sieve Size (mm) - 3.6 / 1.2 / 0.6
DBL Wet & Dry Vacuum Cleaner DB-15L
Power 1000W Capacity 15L Suction power 16kpa Cord length 5m Sounds level L88db(A) Power supply AC230V~50Hz One year repair warranty
INGCO Deep Well Pump With Control Box 0.5Hp
Input Power: 370W(0.5HP) Max.Head: 48M Max.Flow: 6.0M3/H Impeller: 6 Stage Copper Wire Motor Pump Body: Stainless 20m Length Cable + Switch
AGROMAX Submersible Pump Clean Water Series 0.5HP 1″(Float Switch)
0.5HP Pipe diameter(Outlet) 1” Maximum total head 56Ft Maximum capacity 5000L/P/H Six months onsite repair warranty
NAVIGATOR Portable Gasoline Generator 7.5kW (Key start)
Air cooled 4 stroke OHV Single cylinder Rated voltage 220V Rated frequency 50Hz Rated power 7.0kW Maximum power 7.5kW Ignition system Transistor magneto Starting system Recoil and key start Displacement 458cc Maximum output 18.0HP Fuel tank capacity 25L Oil capacity 1.1L Six months repair warranty
DBL Gasoline Jack Hammer 95A
Engine type: 44x34mm, single cylinder, air cooling, 2stroke Displacement: 52cc Fuel: Mixed oil(25 gasoline:1 motor oil) Fuel tank capacity: 1.3L Maximum power and speed: 1800W(2.4HP)/6500r/min Maximum torque and speed: 3.5N.M/5000r/min Fuel consumption rate ≤0.6L/h No-load BPM: 1500 min-1 Impact energy: 20~55J Carburetor type: H119-6A Spark plug type: BM6A Starter system: Hand pull start Accessories: Tine chisel, flat chisel
INGCO Deep Well Pump 1.5H.P.
Voltage:220-240V~50Hz Input power:1100W(1.5HP) Max.head:74M Max.flow:10M3/H Pipe diameter:2″ Well pump body:4″ Impeller:12 stage Copper wire motor Pump body:Stainless steel 30m length cables Not included control box
AGROMAX Deepwell Pump 1.5HP (Hi-Jet Series)
1.5HP Pipe diameter(Outlet) 1¼” Maximum total head 343Ft Maximum capacity 6000L/P/H Six months onsite repair warranty

Reviews
There are no reviews yet