Air-cooled
Gasoline engine
4cycle
OHV
Single phase
Frequency 50-60Hz
Maximum output 1300-1400W
Rated output 1200-1300W
Engine model SFE100
Displacement 100cc
Maximum output 3.5HP/4000rpm
Voltage regulator Capacitor
Power factor 1.0
Ignition system T.C.I
Starting system Recoil starter
Fuel type Gasoline
Fuel tank capacity 4.2L
Lubricating oil capacity 0.4L
Six months service warranty
Sold out
FIRMAN Gasoline Generator 1.5kW
රු79,995.00
Air-cooled
Gasoline engine
4cycle
OHV
Single phase
Frequency 50-60Hz
Maximum output 1300-1400W
Rated output 1200-1300W
Engine model SFE100
Displacement 100cc
Maximum output 3.5HP/4000rpm
Voltage regulator Capacitor
Power factor 1.0
Ignition system T.C.I
Starting system Recoil starter
Fuel type Gasoline
Fuel tank capacity 4.2L
Lubricating oil capacity 0.4L
Six months service warranty
Earn 799 reward points by purchasing this product
Out of stock
Description
Additional information
| Weight | 28 kg |
|---|---|
| Model No. | SPG1500 |
Reviews (0)
Be the first to review “FIRMAN Gasoline Generator 1.5kW” Cancel reply
Instalment Plans
Instalment Plans
Installment payments via credit cards can be made by selecting Payhere as the payment option at checkout. Cart total should be within the purchase limit specified below
| BANK | INSTALLMENT PLAN | MONTHLY AMOUNT | FEE TO CUSTOMER | PURCHASE LIMIT |
|---|---|---|---|---|
DFCC VISA,MASTER | 3 Months Plan | රු.27,632.12 | 3.5% | Min: රු.10,000 Max: රු.600,000 |
| 6 Months Plan | රු.14,034.21 | 5% | ||
| 12 Months Plan | රු.7,245.92 | 8% | ||
Commercial VISA,MASTER | 3 Months Plan | රු.26,665.00 | 0% (Interest FREE) | Min: රු.10,000 Max: රු.1,000,000 |
| 6 Months Plan | රු.14,183.51 | 6% | ||
| 12 Months Plan | රු.7,406.94 | 10% | ||
Sampath VISA,MASTER | 3 Months Plan | රු.26,665.00 | 0% (Interest FREE) | Min: රු.5,000 Max: රු.1,000,000 |
| 6 Months Plan | රු.13,453.58 | 0.9% | ||
| 12 Months Plan | රු.6,865.35 | 2.9% | ||
HNB VISA,MASTER | 3 Months Plan | රු.26,665.00 | 0% (Interest FREE) | Min: රු.10,000 Max: රු.1,000,000 |
| 6 Months Plan | රු.13,332.50 | 0% (Interest FREE) | ||
| 12 Months Plan | රු.6,666.25 | 0% (Interest FREE) |
Shipping & Delivery
*/*/
Related products
Chain Saw 2500 cc 12”
Engine: Air cooled,Two-stroke,Single cylinder Gasoline Max Power: 0.9kw/8500rpm Fuel tank capacity: 230ML Oil tank capacity: 160ML Fuel &Oil(2T) mix ratio: 25:1 Start method: Recoil starter Speed: 2800-3600rpm Bar length: 12''
DBL Gasoline Jack Hammer 95A
Engine type: 44x34mm, single cylinder, air cooling, 2stroke Displacement: 52cc Fuel: Mixed oil(25 gasoline:1 motor oil) Fuel tank capacity: 1.3L Maximum power and speed: 1800W(2.4HP)/6500r/min Maximum torque and speed: 3.5N.M/5000r/min Fuel consumption rate ≤0.6L/h No-load BPM: 1500 min-1 Impact energy: 20~55J Carburetor type: H119-6A Spark plug type: BM6A Starter system: Hand pull start Accessories: Tine chisel, flat chisel
INGCO Deep Well Pump 2H.P.
Voltage:220-240V~50Hz Input power: 1500W(2HP) Max.head:135M Max. flow:5.0M3/H Pipe diameter:1 1/4″ Well pump body:4″ Impeller:17 stage Copper wire motor Pump body:Stainless 20m length cable Not included control box Packed by carton box
INGCO Cordless Drill 14.4V
Drill volts: 14.4V No load speed: 0-550rpm Chuck: 10mm keyless chuck Torque settings: 15+1 Light weight design Including 1pcs battery pack Including 1pcs 3-5Hr charger Charger Volts: 220-240V~50Hz
AGROMAX Deep Well Pump Hi-Jet Series 2HP
2HP Pipe diameter(Outlet) 1¼” Maximum total head 429Ft Maximum capacity 6000L/P/H Six months onsite repair warranty
BOSCH Cordless Impact Drill 18V GSB 180-LI
Battery voltage 18V Torque 21/54Nm No-load speed (1st gear / 2nd gear) 0 – 500 / 0 – 1,900rpm Chuck capacity 1.5 - 13mm Torque settings 20+2 Battery type Lithium-ion Maximum impact rate 27000bpm Maximum drilling diameter in wood 35mm Maximum drilling diameter in steel 10mm Maximum drilling diameter in masonry 10mm Maximum screw diameter 10mm Accessories included; 2Pc of 1.5Ah Li-ion battery and Charger GAL 18V-20 Professional
BOSCH Cordless Drill Driver 12V GSR 120-LI
Battery voltage 12V Battery type Lithium-ion No-load speed(1st gear / 2nd gear) 0 – 380 / 0 – 1,300rpm Chuck capacity, min./max. 0.8 / 10mm Torque settings 20+1 Torque (soft/hard) 13/30Nm Maximum drilling diameter in wood 20mm Maximum drilling diameter in steel 8mm Maximum screw diameter 7mm Accessories included; 2 x 12 V 1.5 Ah Li-ion battery, 1 x GAL 1210 CV Charger
Disk Mill FFC-23 With 5hp Motor
Model - FFC 23 Rotational Speed of Main Shaft (rpm) -5800 Outer Diameter of the Rotator (mm) - 230 Number of Oblate Gears of the Rotator (p.c.) - 4 Number of Knuckle Gears of the Rotator (p.c.) - 8 Circles of Square Gears of the Gear Wheel - 2 Pitch between Oblate Gear & Screen (mm) - 19 Sieve Size (mm) - 3.6 / 1.2 / 0.6

Reviews
There are no reviews yet