Model no MIG/MMA-225
Gasless
Dual mode
MIG: 30A/15.5V-225A/25.3V
MMA: 30A/21.2V-205A/28.2V
Six months repair warranty
Sold out
Previous product
Back to products
INGCO Combintion Spanner 27mm
රු2,040.00
Next product
INGCO Combination Spanner 26mm
රු1,800.00 Original price was: රු1,800.00.රු1,620.00Current price is: රු1,620.00.
INTIMAX Mig Welding Machine MIG/MMA-225 (Gasless)
රු39,995.00
Model no MIG/MMA-225
Gasless
Dual mode
MIG: 30A/15.5V-225A/25.3V
MMA: 30A/21.2V-205A/28.2V
Six months repair warranty
Out of stock
Description
Additional information
Weight | 6.5 kg |
---|---|
Model No. | 0939 |
Reviews (0)
Be the first to review “INTIMAX Mig Welding Machine MIG/MMA-225 (Gasless)” Cancel reply
Instalment Plans
Instalment Plans
Installment payments via credit cards can be made by selecting Payhere as the payment option at checkout. Cart total should be within the purchase limit specified below
BANK | INSTALLMENT PLAN | MONTHLY AMOUNT | FEE TO CUSTOMER | PURCHASE LIMIT |
---|---|---|---|---|
DFCC VISA,MASTER |
3 Months Plan | රු.13,815.20 | 3.5% |
Min: රු.10,000 Max: රු.600,000 |
6 Months Plan | රු.7,016.67 | 5% | ||
12 Months Plan | රු.3,622.74 | 8% | ||
Commercial VISA,MASTER |
3 Months Plan | රු.13,331.67 | 0% (Interest FREE) |
Min: රු.10,000 Max: රු.1,000,000 |
6 Months Plan | රු.7,091.31 | 6% | ||
12 Months Plan | රු.3,703.24 | 10% | ||
Sampath VISA,MASTER |
3 Months Plan | රු.13,331.67 | 0% (Interest FREE) |
Min: රු.5,000 Max: රු.1,000,000 |
6 Months Plan | රු.6,726.37 | 0.9% | ||
12 Months Plan | රු.3,432.46 | 2.9% | ||
HNB VISA,MASTER |
3 Months Plan | රු.13,331.67 | 0% (Interest FREE) |
Min: රු.10,000 Max: රු.1,000,000 |
6 Months Plan | රු.6,665.83 | 0% (Interest FREE) | ||
12 Months Plan | රු.3,332.92 | 0% (Interest FREE) |
Shipping & Delivery
*/*/
You may also like…
INGCO Insulated Screwdriver PZ1 x 80mm
CR-V,PZ1×80
New design handle
Round shank
1000V,VDE Certification
Packed by plastic hanger
Intimax High Pressure Washer 130bar
High pressure washer
220-240V~50/60Hz
Input power:2500W/2700W
Pressure:70-130Bar
Flow:14L/min 20L/min
BEKER Mig Welding Machine 250A
Input voltage : 230v/50-60Hz
Current range : 50-250A
Real max current : 250A
Rated duty cycle : 60%
Dimention(mm): 38 x 15 x 26cm
Net weight : 9.5 kg
Welding Wire: 0.8/1.00mm
With standard accessories.
Electrode Holder
Ground cable
Safety Shield
Related products
DITEC High Pressure Washer 70bar 1300W – Motor Type
Model: BT202-07
Type: Motor type (copper winding)
Power: 1300W
Voltage: 230V-50Hz
Max Pressure: 105bar
Rated pressure: 70bar
Max water inlet pressure: 1.2MPa
Max water inlet temperature: 40'C
INGCO Deep Well Pump 2H.P.
Voltage:220-240V~50Hz
Input power: 1500W(2HP)
Max.head:135M
Max. flow:5.0M3/H
Pipe diameter:1 1/4″
Well pump body:4″
Impeller:17 stage
Copper wire motor
Pump body:Stainless
20m length cable
Not included control box
Packed by carton box
AGROMAX Deepwell Pump 1.5HP (Hi-Jet Series)
1.5HP
Pipe diameter(Outlet) 1¼”
Maximum total head 343Ft
Maximum capacity 6000L/P/H
Six months onsite repair warranty
DBL Gasoline Jack Hammer 95A
Engine type: 44x34mm, single cylinder, air cooling, 2stroke
Displacement: 52cc
Fuel: Mixed oil(25 gasoline:1 motor oil)
Fuel tank capacity: 1.3L
Maximum power and speed: 1800W(2.4HP)/6500r/min
Maximum torque and speed: 3.5N.M/5000r/min
Fuel consumption rate ≤0.6L/h
No-load BPM: 1500 min-1
Impact energy: 20~55J
Carburetor type: H119-6A
Spark plug type: BM6A
Starter system: Hand pull start
Accessories: Tine chisel, flat chisel
BOSCH Cordless Impact Drill 18V GSB 180-LI
Battery voltage 18V
Torque 21/54Nm
No-load speed (1st gear / 2nd gear) 0 – 500 / 0 – 1,900rpm
Chuck capacity 1.5 - 13mm
Torque settings 20+2
Battery type Lithium-ion
Maximum impact rate 27000bpm
Maximum drilling diameter in wood 35mm
Maximum drilling diameter in steel 10mm
Maximum drilling diameter in masonry 10mm
Maximum screw diameter 10mm
Accessories included; 2Pc of 1.5Ah Li-ion battery and Charger GAL 18V-20 Professional
INGCO Deep Well Pump 1.5H.P.
Voltage:220-240V~50Hz
Input power:1100W(1.5HP)
Max.head:74M
Max.flow:10M3/H
Pipe diameter:2″
Well pump body:4″
Impeller:12 stage
Copper wire motor
Pump body:Stainless steel
30m length cables
Not included control box
Disk Mill FFC-23 With 5hp Motor
Model - FFC 23
Rotational Speed of Main Shaft (rpm) -5800
Outer Diameter of the Rotator (mm) - 230
Number of Oblate Gears of the Rotator (p.c.) - 4
Number of Knuckle Gears of the Rotator (p.c.) - 8
Circles of Square Gears of the Gear Wheel - 2
Pitch between Oblate Gear & Screen (mm) - 19
Sieve Size (mm) - 3.6 / 1.2 / 0.6
INGCO Cordless Drill 18V
Drill volts:18V
No load speed:0-400rpm/0-1400rpm
10mm Keyless chuck
Torque settings:23+1
Including 2pcs battery packs
Including 1pc 3-5Hr charger
With LED light
7# big motor
Including 13pcs accessories
Packed in blow mould case
Reviews
There are no reviews yet