INGCO LITHIUM ION CORDLESS DRILL 18V
රු17,214.00
or 3 X රු 6,040 with 
Voltage: 20V No-load speed: 0-400/0-1500/min Max.torque: 45NM Chuck capacity: 0.8-10mm Torque settings: 15+1 Mechanical 2-speed gear 18V Lithium-Ion 2.0Ah batteries Charge volts: 220V-240V~50/60Hz
INGCO LITHIUM-ION CORDLESS DRILL 16.8V
රු13,911.00
or 3 X රු 4,881 with
Voltage : 16.8V No-load speed : 0-350/0-1350/min Max.torque : 28NM Chuck Capacity : 0.8-10mm Torque Settings : 15+1 16.8V Lithium-Ion 1.5Ah batteries Mechanical 2-speed gear With 1pcs battery pack With 1pc 2Hr charger Charge Volts : 100V-240V~50/60Hz
INGCO Lithium-Ion Cordless Drill
රු12,126.00
or 3 X රු 4,255 with
Voltage:12V No-load speed:0-350/0-1350/min Chuck capacity:0.8-10mm
INGCO Lithium-Ion Multi-Tool
රු10,464.00
or 3 X රු 3,672 with
Voltage:20V No-load speed:5000-20000r/min
INGCO Lithium-Ion Rotary Hammer 20V
රු17,733.00
or 3 X රු 6,222 with
Voltage:20V No-load speed:0-900/min Impact rate:0-5100bpm
INGCO Lithium Ion Soldering Iron 20V – NEW PROMOTION ITEMS
රු3,447.00
or 3 X රු 1,209 with
Voltage:20V Input power:40W Preheat time:3~5minuters
Engine Pump ( GASOLINE WATER PUMP) 2” ROBIN TYPE
රු59,995.00
or 3 X රු 21,051 with
Suction Range: 7/8m lift range: 26m/28m Hand start(recoil) Muffler/ Silencer with low noise Cast iron Camshaft, high quality Carburetor Best quality Crankcase with shining Pump body Galvanized shining Screw, A++ grade Piston 7
INGCO Centrifugal Water Pump 2HP
රු45,795.00
or 3 X රු 16,068 with
Rated voltage 220-240V~ Rated frequency 50Hz Single phase Rated output 1.5kW/2HP Maximum head 18m Maximum suction 8m Maximum flow 450l/min Inlet/outlet 2″x2″ Protection class IPX4 Insulation class F Five years service warranty
INGCO LITHIUM-ION MIXER – NEW PROMOTION ITEMS
රු24,876.00
or 3 X රු 8,728 with
INGCO LITHIUM-ION MIXER - NEW PROMOTION ITEMS Voltage:20V No-load speed: 0-650rpm Mixing pad thread: M14 06 months repair warranty Battery and charger not included
LIDA Wood Working Machine 10” without angle cutter
රු209,995.00
or 3 X රු 73,682 with
Planning: 250/6mm Round Saw: 85/3, 1/2mm Thicknessing: 1200/4, 1/2mm Rabbeting: 16/5/8mm