Show sidebar

AGROMAX Deepwell Pump 3HP (Hi-Jet Series)

රු127,995.00
or 3 X රු 44,911 with Koko Koko
High jet series Usage Domestic, agriculture and long distance water supply 3HP Pipe diameter(Outlet) 1¼” Maximum total head 620Ft Maximum capacity 6000L/P/H Six months onsite repair warranty
or 3 X රු 42,665.00 with Koko Koko
Add to cart

INGCO Deep Well Pump 1.5H.P.

රු83,595.00
or 3 X රු 29,332 with Koko Koko
Voltage:220-240V~50Hz Input power:1100W(1.5HP) Max.head:74M Max.flow:10M3/H Pipe diameter:2″ Well pump body:4″ Impeller:12 stage Copper wire motor Pump body:Stainless steel 30m length cables Not included control box
or 3 X රු 27,865.00 with Koko Koko
Read more

DITEC High Pressure Washer 70bar 1300W – Motor Type

රු27,995.00
or 3 X රු 9,823 with Koko Koko
Model: BT202-07 Type: Motor type (copper winding) Power: 1300W Voltage: 230V-50Hz Max Pressure: 105bar Rated pressure: 70bar Max water inlet pressure: 1.2MPa Max water inlet temperature: 40'C
or 3 X රු 9,331.67 with Koko Koko
Add to cart

PRESCOTT Gasoline Generator 5.5kw

රු172,494.00
or 3 X රු 60,524 with Koko Koko
Output Type AC Single Phase Rated AC Output 230V,50Hz Max:5.5Kw Rated 5.0Kw Rated Speed 3000rpm Displacement 389cc,13hp Phase Single-Phase Engine Type 4 Stroke,OHV Air cooled Start system electric Alternator 100% COPPER
or 3 X රු 57,498.00 with Koko Koko
Read more

DBL Inverter Welding Plant 250MMA -(DB250)

රු35,995.00
or 3 X රු 12,630 with Koko Koko
Model:(DB250) Brand:DBL Rated:supply voltage 230V Supply:frequency 50Hz No-load:voltage 62V Rated input:capacity 7.5Kva Welding current:range 10-200AMP Rated current duty cycle:200-60Amp-% Continuous weld electrode:1.6-5.0mm, 55Pcs for ϕ4 Test temperature:23C0
or 3 X රු 11,998.33 with Koko Koko
Read more

Mac Welder Machine Inverter- IN- 295

රු37,495.00
or 3 X රු 13,156 with Koko Koko
Model MAC Inverter Brand New Condition Rated supply voltage 220/230V Rated supply current 41.5A frequency 50/60Hz Welding current max 295A Rated welding voltage 28V Usable electrode 1.6-5.0mm 6 Months repair warranty
or 3 X රු 12,498.33 with Koko Koko
Add to cart

MAC Welder Machine Inverter- ARC 250

රු37,495.00
or 3 X රු 13,156 with Koko Koko
Model MAC250ARC Brand New Condition Welding Current 20 - 200A Duty Cycle 60% Electrode Diameter 1.6 - 4 Rated Input Voltage 160v-250v 6 Months Repair Warranty
or 3 X රු 12,498.33 with Koko Koko
Add to cart

Chain Saw 2500 cc 12”

රු36,995.00
or 3 X රු 12,981 with Koko Koko
Engine: Air cooled,Two-stroke,Single cylinder Gasoline Max Power: 0.9kw/8500rpm Fuel tank capacity: 230ML Oil tank capacity: 160ML Fuel &Oil(2T) mix ratio: 25:1 Start method: Recoil starter Speed: 2800-3600rpm Bar length: 12''
or 3 X රු 12,331.67 with Koko Koko
Read more

HUGO Welding Transformer PBX6-250

රු34,994.00
or 3 X රු 12,279 with Koko Koko
Rated output current 250A Power voltage 230V No-load voltage 55V Rated power 12.4kvA Frequency 50Hz Rated duty cycle 20% Current adjusting range 90-250A Diameter of applicable electrode 2-4mm Protection grade IP21S Six months repair warranty
or 3 X රු 11,664.67 with Koko Koko
Add to cart

XCORT Welding Machine MMA-335H

රු39,995.00
or 3 X රු 14,033 with Koko Koko
Rated voltage 220 – 240V Frequency 50/60Hz Rated input Current 43.6A No-load voltage 68V Rated output current 335A Duty cycle 60% Efficiency 80% Power factor 0.73 Electrode diameter 1.6 -5.0mm Accessories included; 01Pc electrode holder with cable, 01Pc earth clamp with cable, 01Pc hand shield, 01Pc cleaning brush
or 3 X රු 13,331.67 with Koko Koko
Add to cart

DBL Welding Transformer BX6-250G

රු31,295.00
or 3 X රු 10,981 with Koko Koko
Rated output current 250A Rated input voltage 230/400V Rated frequency 50/60Hz Rated input capacity 15.6kvA No-load voltage 55V Rated load sustain rate 20% Current range 60-250A Applicated welding rod diameter 2-5mm Insulation grade F Six months repair warranty
or 3 X රු 10,431.67 with Koko Koko
Read more

BOSCH Cordless Drill Driver 12V GSR 120-LI

රු31,575.00
or 3 X රු 11,079 with Koko Koko
Battery voltage 12V Battery type Lithium-ion No-load speed(1st gear / 2nd gear) 0 – 380 / 0 – 1,300rpm Chuck capacity, min./max. 0.8 / 10mm Torque settings 20+1 Torque (soft/hard) 13/30Nm Maximum drilling diameter in wood 20mm Maximum drilling diameter in steel 8mm Maximum screw diameter 7mm Accessories included; 2 x 12 V 1.5 Ah Li-ion battery, 1 x GAL 1210 CV Charger
or 3 X රු 10,525.00 with Koko Koko
Add to cart