Cable Oiling Machine
Country Of Origin Sri Lanka
Operation Manual
Capacity 5Ltrs
Operation Manual Included with the Machine
Carbyte Tank 500g
Item Carbyte Tank
Country of Origin Sri Lanka
Capacity 500g
Operation Manual
Cement Block Machine (7x4x14)
Item Cement Block Machine
Spectra Cement Block Machine (Double Block)
Country of Origin Sri Lanka
Brand New Product
Type Vibrator Motor type
Operation - Manual
Power 1 HP ,Single Phase ,50Hz
Cement Block Mold Size 7’’x 4’’x 14’’ / 6’x 4’x 12’
Operation Manual Included with the Machine
Warranty,
Structure (One Year Warranty for Manufacturing defects only)
Motor (One Month Warranty for Manufacturing defects only)
Not Covered Under Warranty,
For the defects occurred due to voltage issues and lightning impulses
For the defects occurred due to user mistakes (Proper usage techniques will be
provided at the point of purchase)
Chain Saw 2500 cc 12”
Engine: Air cooled,Two-stroke,Single cylinder Gasoline
Max Power: 0.9kw/8500rpm
Fuel tank capacity: 230ML
Oil tank capacity: 160ML
Fuel &Oil(2T) mix ratio: 25:1
Start method: Recoil starter
Speed: 2800-3600rpm
Bar length: 12''
Chain Saw 5800cc 22″
Size:22"
Max Power: 3.5KW
Displacement: 58.0CC
Fuel Max. Ratio: 25:1
Oil:0.7L/H
DBL Gasoline Jack Hammer 95A
Engine type: 44x34mm, single cylinder, air cooling, 2stroke
Displacement: 52cc
Fuel: Mixed oil(25 gasoline:1 motor oil)
Fuel tank capacity: 1.3L
Maximum power and speed: 1800W(2.4HP)/6500r/min
Maximum torque and speed: 3.5N.M/5000r/min
Fuel consumption rate ≤0.6L/h
No-load BPM: 1500 min-1
Impact energy: 20~55J
Carburetor type: H119-6A
Spark plug type: BM6A
Starter system: Hand pull start
Accessories: Tine chisel, flat chisel
Disk Mill FFC-23 With 5hp Motor
Model - FFC 23
Rotational Speed of Main Shaft (rpm) -5800
Outer Diameter of the Rotator (mm) - 230
Number of Oblate Gears of the Rotator (p.c.) - 4
Number of Knuckle Gears of the Rotator (p.c.) - 8
Circles of Square Gears of the Gear Wheel - 2
Pitch between Oblate Gear & Screen (mm) - 19
Sieve Size (mm) - 3.6 / 1.2 / 0.6
Ditec Brush Cutter Machine BG-328
Techincal Data
2 stroke hot sales brush cutter BG328A
Matched Engine: 1E36F
Displacement(cc): 30.5
Max.Power(kw/r/min): 0.81/6500
Cutting Width(mm):415
Blade Width(mm): 255/305/355
DITEC High Pressure Washer – Belt (QL-550)
Brand DITEC
Item High Pressure Washer
Type Belt
Pressure 3-4MPa
Flow 30L/min
Motive Power 2.2kW
Speed 1400RPM
Voltage 220-240V/50Hz
Earth Auger 200 x 800mm 63cc
· 2-Cycle, 63cc engine provides powerful, efficient performance
· Anti-vibration foam grip handles that reduce fatigue
· Bit turns at 280 RPM maximum to move earth quickly and easily
LIDA 10″ Wood Working Machine With Angle Cutter
Planning: 250/6mm
Round Saw: 85/3, 1/2mm
Thicknessing: 1200/4, 1/2mm
Rabbeting: 16/5/8mm
01 Year repair warranty
LIDA Wood Working Machine 10” without angle cutter
Planning: 250/6mm
Round Saw: 85/3, 1/2mm
Thicknessing: 1200/4, 1/2mm
Rabbeting: 16/5/8mm